Temperature Pid Process Controller

Axis LT Series Digital PID Controller

The Axis family of microprocessor based controllerscombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4 DIN.
They are ideal controllers for regulating temperature in a variety of applications, including :

  • Dryers.
  • Semiconductor packaging /testing.
  • Plastic processing.
  • Packaging machinery.
  • Painting and coating.
  • Climatic chambers.

The Axis  family satisfies low cost basic control requirements and also provides advanced features such as motor position control, phase angle power control and Setpoint programming
Dual displays and Bargraph. Programmer functionality.
Two 4 digits displays and one LED  bargraph to display the PV and SP.
Easy to configure.  Two different configuration levels provide easy access to parameters.
A 4-digit security code preventsunauthorized changes. Parameters can be hidden to the user to prevent misconfiguration of the unit. 
Various Control algorithms.

  • PID or ON/OFF control.
  • Heat/Cool Algorithm.
  • Motor Position control.
  • Single phase or 3 phase control.

Single phase or 3 phase control.
2 programs available, each of 8 segments. Programs can be linked to form a single 16 segments program.Extended Alarm capability.
Up to 3 different alarm outputs per instrument, 17 different alarm modes available.

Universal Power supply.
Operates on any line voltage from 85Vac to 265Vac at 50/60Hz.

AXIS LT - ES Series Digital PID Controller

The Axis family of microprocessor based controllersc ombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4 DIN.
They are ideal controllers for regulating temperature in a variety of applications, including :

  • Dryers.
  • Semiconductor packaging /testing.
  • Plastic processing.
  • Packaging machinery.
  • Painting and coating.
  • Climatic chambers.

The Axis  family satisfies low cost basic control requirements and also provides advanced features such as motor position control, phase angle power control and Set-point programming
Dual displays and Bargraph. Programmer functionality.

Two 4 digits displays and one LED  bargraph to display the PV and SP.

Easy to configure.  Two different configuration levels provide easy access to parameters.
A 4-digit security code preventsunauthorized changes. Parameters can be hidden to the user to prevent misconfiguration of the unit. 
Various Control algorithms.
PID or ON/OFF control.

Universal Power supply.
Operates on any line voltage from 85VAC TO 265VAC AT 50/60HZ.

Axis AX Seies PID Temperature Controllers

Features:

  • Low cost, Effective, Easy to use PID Temperature Controller
  • 3-Digit Dual Row display (3-Digit for PV & 3
  • Selectable sensor input (T/C : K,T,E,J,N & RTD) from keyboard
  • Programmable Lower & Upper set point limits
  • Programmable control action ON-OFF/PID control
  • Selectable heat/cool logic in ON-OFF control mode
  • Four different alarm modes (Low/High/Band/Deviation)
  • Alarm latch / Alarm inhibit function
  • Program lock function (to prevent unauthorized
  • Universal supply voltage ranges from 90 to 270 VAC
  • Available in 4 Standard DIN sizes

Sub-Zero Chiller /Compressor Cooling Temperature Controller

Approx Price: Rs 1,500 / Piece 
Main Features:

  • Cooling output.
  • Memory retention, time delay for compressor protection.
  • Auto operation incase of sensor error.

Input & OutputRelay :

  • output :SZ-7510E - 8(3)A / SZ-7569E - 20A (Inductive).
  • Temp. Sensor Input : 1 NTC.

Application:

General appliances like deep freezers, display cabinet, pastry cabinet.

General Specification:

  • Temperature range -50°C to 50°C.
  • 230VAC Standard. Other models with 12VDC, 24VDC, 110VAC on request.
  • Panel cutout : 29 X 71 mm Screw terminals : Admit 1X 2.5 mm² wire.
Spade terminals for compressors (For SZ-7569-E only).

Sub-Zero Chiller /Compressor Cooling Temperature Controller

Approx Price: Rs 1,700 / Piece 
Main Features:

  • Cooling & Heating output.
  • Memory retention, time delay for compressor protection.
  • Auto operation incase of sensor error.
  • Power switch.
  • Digital input (HP, LP, OSS, Phase Loss).

Input & Output:

  • Relay output : 8(3)A.
  • Temp. Sensor Input : 1 NTC.

Application:

  • Chiller machines & similar applications.

General Specification:

  • Temperature range -50°C to 99°C.
  • 230VAC Standard. Other models with 12VDC, 24VDC, 110VAC on request.
  • Panel cutout : 29 X 71mm Screw terminals : Admit 1X 2.5 mm2 wire.

Sub-Zero Chiller /Compressor Cooling Temperature Controller

Approx Price: Rs 1,500 / Piece 
Main Features:

  • LCD with backlighting to display all parameters.
  • 2 NTC probes for cold room temp evap. coil temperature.
  • Relay outputs : Compressor Cond. Fan Heater Evap. Fan Alarm.
  • Audible alarm. •Digital inputs : 2nos (a) Door switch (b) Pressure cutout.
  • HP/LP/OSS trip protection for compressor. •Compressor protection algorithm.
  • Auto/Mannual defrosting facility (Time/Temp based).
  • Special software to indicate probable heater fault.

Input & Output:

  • Relay Output 1 : 8(3)A Compressor.
  • Output 2 : 8(2)A Heater.
  • Output 3 : 8(2)A Evaporator Fan.
  • Output 4 : 8(3)A Condenser Fan.
  • Output 5 : 5A Alarm .
  • Temp. Sensor Input : 2NTC for Cold room chamber and Evaporator Coil.

General Specification:

  • Temperature range: -50°C to 50°C.
  • 230VAC Standard. 110VAC on request.
  • Panel cutout : 92 X 92 mm Screw terminals : Admit 1X 2.5 mm2 wire.

Sub-Zero Chiller, Compressor Cooling Temperature Controller

Approx Price: Rs 1,500 / Piece 
Main Features:

  • Switch off compressor at setpoint.
  • Manual reset is required to re-start.
  • Buzzer output on achieving antifreeze set point.

Input & Output:

  • Relay output : 8 (3)A.
  • Buzzer output :10VDC, 10mA Max.
  • Temp. Sensor Input : 1 NTC with ½’’ BSP connection.

ApplicationChiller machines.

  • General SpecificationTemperature range -50°C to 50°C.
  • 230VAC Standard. Other models with 12VDC, 24VDC, 110VAC on request.
  • Panel cutout : 29 X 71 mm. Screw terminals : Admit 1X 2.5 mm² wire.

Series 18C/19C/25C DIN Temperature/Process Controller

The Athena 18C and 19C are available as 1/8 DIN (18C) vertical or 1/8 DIN (19C) horizontal models. Both panel mounted, auto-tuning controllers can be used for precise control of a single loop with two independent outputs field-configurable as direct acting, reverse acting, and 2 alarms. RS-232 or RS-485 communications interfaces are available for both models, and two digital LED displays provide visual indication of various controller functions.

•  Field-Configurable Universal Inputs
•  User-Selectable Ramp to Setpoint
•  8-Level Ramp/Soak Control
•  Bumpless Auto/Manual Transfer
•  NEMA 4X (IP65) Dust and Splash-Proof Front Panel
•  Decimal Display in 0.1° for Measured Temperatures Under 1000° F or C
•  On/Off through Full PID Operation (P, PI, PD, PID)
•  Adjustable Hysteresis and Deadband
•  Outputs Configurable as Alarms
•  Field-Configurable Process or Deviation Alarms; Latching or Non-Latching; Band and Inverse Band
•  Dual Output/Dual Alarm Capabilities
•  UL, cUL, and CE Approvals
•  Options Include Remote Analog Setpoint, Multi- Function Contact/Digital Input, Transducer Excitation, and Auxiliary Output
•  Special and Custom Options Available

Series 16C DIN Temperature/Process Controller

The Athena 16C is a 1/16 DIN panel mounted, autotuning controller that can be used for precise control of a single loop with two independent outputs fieldconfigurable as direct acting, reverse acting or alarm. RS-232 or RS-485 communications interfaces are available, and two digital LED displays provide visual indication of various controller functions.

• Field-Configurable Universal Inputs
• User-Selectable Ramp to Setpoint
• 8-Level Ramp/Soak Control
• Bumpless Auto/Manual Transfer
• NEMA 4X (IP65) Dust and Splash-Proof Front Panel
• Decimal Display in 0.1° for Measured Temperatures Under 1000° F or C
• On/Off Through Full PID Operation (P, PI, PD, PID)
• Adjustable Hysteresis and Deadband
• Outputs Configurable as Alarms
• Field-Configurable Process or Deviation Alarms; Latching or Non-Latching; Band and Inverse Band
• Dual Output/Dual Alarm Capabilities
• UL, cUL, and CE Approvals
• Options Include Multi-Function Contact/Digital Input, Transducer Excitation, and Auxiliary Output
• Special and Custom Options Available
• DIN Rail Option
Looking for Temperature Pid Process Controller ?
© Dydac Controls
 
Desktop Site Back to top